Windows Client Ap Login - ATEN KH1508Ai User Manual

KH1508 i / KH1516 i User Manual
A A

Windows Client AP Login

The Windows AP Client allows direct remote access to Windows systems
users, without having to go through a browser (although you initially download
the Windows AP Client program from the browser page – see Chapter 12,
Download). To connect to the KH1508 i / KH1516 i, go to the location on
A A
your hard disk that you downloaded the Windows AP Client program to, and
double-click its icon (WinClient.exe). If this is the first time that you are
running the utility, a dialog box appears requesting that you input your serial
number:
The serial number can be found on a sticker on the inside cover of the User
Manual. Key in the serial number – 5 characters per box – then click OK to
bring up the Windows Client Connection screen, shown below.
Note: 1. Letters in the serial number must be entered in upper case.
2. This dialog box only appears the first time you run the program. In the
future, you go directly to the Windows Client Connection screen.
To connect to the KH1508 i / KH1516 i, click the WinClient.exe program
A A
icon (on your desktop) to bring up the Windows Client Connection screen:
52