F4: Adm - ATEN KH1508Ai User Manual

Cat 5 high-density kvm over the net
Hide thumbs Also See for KH1508Ai:
Table of Contents

Advertisement

F4: ADM

F4 is an administrator only function. Accessing this function allows the
administrator to configure and control the overall operation of the OSD. To
change a setting double click it; or use the up and down arrow keys to move the
highlight bar to it, then press [Enter].
After you select an item, a submenu with further choices appears. Double click
the choice you want, or move the highlight bar to it, then press [Enter]. An icon
appears before the selected choice. The settings are explained in the table on
the next three pages:
Setting
SET IP
This function is used to select whether to assign the KH1508
ADDRESS
KH1516
address.
Enable DHCP to assign the IP address automatically.
Disable DHCP to assign a fixed IP address and specify the IP, Mask,
and Gateway in the appropriate fields.
Note: The default setting for DHCP is disabled.
EDIT PORT
To identify which computer is attached to a particular port, every port
NAMES
can be assigned a name. This function allows the administrator to
create, modify, or delete port names. To assign a port name:
1. Click the port you want, or use the navigation keys to move the
highlight bar to it, then press [Enter].
2. Key in the new port name, or modify/delete the old one. The maxi-
mum number of characters allowed for the port name is 14. Legal
characters include:
*You can enter the port names in either upper or lower case
however the OSD displays the port name only in UPPERCASE.
3. When you have finished editing, press [Enter] to have the change
take effect. To abort the change, press [Esc].
RESTORE
This function is used to undo all changes and return the setup to the
DEFAULT
original factory default settings (see OSD Factory Default Settings,
VALUES
page 182)
ports, which are saved.
CLEAR THE
This function clears the port name list.
NAME LIST
i's IP address automatically (DHCP), or to give it a fixed IP
A
All alpha characters: A–Z*
All numeric characters: 0–9
except for the Names settings that were assigned to the
Chapter 4. OSD Operation
Function
i /
A
33

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kh1516ai

Table of Contents