Skip Mode Switching - ATEN KH1508Ai User Manual

Skip Mode Switching

This feature allows you to switch between computers in order to monitor them
manually. You can focus on a particular port for as long as you like – as
opposed to auto-scanning, which automatically switches the port focus after a
fixed interval.
Entering Skip Mode
To enter Skip mode, key in the following Hotkey combination:
1. Enter the Hotkey mode by pressing the:
[Num Lock] + [-] or [Ctrl] + [F12]
2. Press one of the
After you press one of the keyboard arrows, you automatically exit Hotkey
mode and enter Skip mode where you can switch ports as follows:
←
Skips to the first accessible port. (See SCAN/SKIP MODE,
page 31, for information regarding accessible ports.)
→
Skips to the next accessible port.
↑
Skips to the last accessible port of the previous station.
↓
Skips to the first accessible port of the next station.
Once you are in Skip mode, you can continue skipping by pressing the
arrow keys. You do not have to use the [Num Lock] + [-] combination
again.
While Skip mode is in effect, ordinary keyboard and mouse functions are
suspended – only Skip mode compliant keystrokes can be input. You must
exit Skip mode to regain normal control of the console.
Exiting Skip Mode
1. To exit Skip mode, press
keys.
[Arrow]
or
[Esc]
Chapter 4. OSD Operation
combination
[Spacebar].
.
43