Clearaudio Innovation User Manual page 8

Please follow the description step by step:
1.)
First take out the three black flat pads out of the accessory bag.
Place these flat pads on your hifi-rack or another suitable base, where the final position of
Innovation
your – turntable will be.
2.)
Innovation
After that, take the
and place the spikes of the turntable on the flat pads.
Pic. 2: Innovation with tonearm base
3.)
To avoid hum noises it can be necessary to ground the bearing. For that please plug in the
provided ground cable into the hole of the screw from the bearing at the bottom side of the
turntable.
Pic. 3: Grounding the bearing of the Innovation
4.)
Remove the protective security tape from the bearing housing.
Place two drops of the synthetic bearing oil on the ceramic bearing shaft
(also available at www.analogshop.de).
Page 7
-turntable body of the next packing layer.
Pic. 4: Oiling the bearing shaft
Innovation /
Innovation Wood
 Clearaudio electronic GmbH 2014
User manual