VTech vt2458 Operating Instructions Manual

VTech vt2458 Operating Instructions Manual

Vtech vt2458: operating instruction
Hide thumbs Also See for vt2458:

Advertisement

Quick Links

Important Safety Instructions

When using your telephone equipment, basic safety precautions should always be followed to reduce the
risk of fire, electric shock and injury, including the following:
1. Read and understand all instructions.
2. Follow all warnings and instructions marked on the product.
3. Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol
cleaners. Use a damp cloth for cleaning.
4. Do not use this product near water (for example, near a bath tub, kitchen sink, or swimming pool).
5. Do not place this product on an unstable cart, stand, or table. The product may fall, causing serious
damage to the product.
6. Slots and openings in the cabinet and the back or bottom are provided for ventilation. To protect it
from overheating, these openings must not be blocked by placing the product on the bed, sofa, rug,
or other similar surface. This product should never be placed near or over a radiator or heat register.
This product should not be placed in a built-in-installation where proper ventilation is not provided.
7. This product should be operated only from the type of power source indicated on the marking label.
If you are not sure of the type of power supply to your home, consult your dealer or local power
company.
8. Do not allow anything to rest on the power cord. Do not locate this product where the cord will be
abused by persons walking on it.
9. Never push objects of any kind into this product through cabinet slots as they may touch dangerous
voltage points or short out parts that could result in a risk of fire or electric shock. Never spill liquid
of any kind on the product.
10.To reduce the risk of electric shock, do not disassemble this product. If service or repair work is
required, contact VTech Customer Service at 1-800-595-9511. Opening or removing cabinet parts
other than specified access doors may expose you to dangerous voltages or other risks. Incorrect
reassembling can cause electric shock when the appliance is subsequently used.
11.Do not overload wall outlets and extension cords as this can result in the risk of fire or electric shock.
12.Unplug this product from the wall outlet:
a) When the power supply cord or plug is damaged or frayed.
b) If liquid has been spilled into the product.
c) If the product has been exposed to rain or water.
d) If the product does not operate normally by following the operating instructions. Adjust only those
controls that are covered by the operating instructions because improper adjustment of other controls
may result in damage and will often require extensive work to restore the product to normal operation.
e) If the product has been dropped and the cabinet has been damaged.
f) If the product exhibits a distinct change in performance.
13.Avoid using a telephone (other than a cordless type) during an electrical storm. There may be a
remote risk of electric shock from lighting.
14.Do not use the telephone to report a gas leak in the vicinity of the leak.
I
f you have questions about this product, or if you're
having difficulty with setup or operation, do not return
your phone to the store. Call our Customer Support
Center at:
In Canada, call
1
1-800-595-9511
1-800-267-7377

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the vt2458 and is the answer not in the manual?

Questions and answers

Summary of Contents for VTech vt2458

  • Page 1: Important Safety Instructions

    10.To reduce the risk of electric shock, do not disassemble this product. If service or repair work is required, contact VTech Customer Service at 1-800-595-9511. Opening or removing cabinet parts other than specified access doors may expose you to dangerous voltages or other risks. Incorrect reassembling can cause electric shock when the appliance is subsequently used.
  • Page 2: Introduction

    Introduction Parts Check List: Handset Base Unit Telephone Line Cord To purchase replacement battery packs, Battery Pack call VTech Communications at 1-800-595- AC Adapter Belt Clip 9511. Canada, Owner's Manual Telecommunications at 1-800-267-7377. Connecting power to Base Unit Plug the AC power adapter into an electrical outlet, and the DC connector into the bottom of the Base Unit.
  • Page 3: Handset Features

    4. Do not dispose of the battery in a fire. The cell may explode. Connect to phone line Plug one end of the telephone line cord into the jack on the bottom of the Base Unit. Plug the other end of this cord into the wall jack.
  • Page 4: Base Unit Features

    Base Unit Features 1. MESSAGE LED 6. ANSWER ON/OFF LED * Flashes slowly to indicate new Glows steadily when the Answering messages; Glows steadily to indicate System is ON and the day and time old (previously heard) messages; has been set; Flashes to indicate that Flashes rapidly to indicate that the the day and time need to be set.
  • Page 5: Changing Channels

    • Press 0. • Press the PROG/MEM key to confirm. Memory Dialing • The VT2458 can store up to 10 different phone numbers that you can dial just by pressing PHONE, PROG/ MEM and one of the number keys (0-9) Programming Speed Dial Numbers The Handset must be OFF.
  • Page 6: Storing Pauses In Memory

    Operating Instructions Storing Pauses in Memory • To insert a pause in a phone number, press PAUSE.The pause is approximately 4 seconds in length. For longer pauses, press PAUSE two or more times. Each additional press adds an additional 4 second pause.
  • Page 7: Handset Layout For Answering System Operation

    2 Set Security Code Your 2 digit security code gives you access to your VT 2458 Answering System from a telephone at a different location. Factory preset to 19, your security code can be set to any number from 10 to 99.
  • Page 8: Set Base Ringer

    Answering System Setup Now, follow the steps in 1 SET OUTGOING MESSAGE to record your “Announce Only” greeting. The VT 2458 Answering System will retain both outgoing greetings; one for Normal (record messages) mode, and one for Announce Only mode. NOTE!!!!! THE ANSWERING SYSTEM IS PRESET AT THE FACTORY FOR ANNOUNCE ONLY OFF.
  • Page 9: Playback Of Greetings, Messages And Memos

    Answering System Setup PLAYBACK OF GREETINGS, MESSAGES AND MEMOS NEW MESSAGE PRIORITY – New, unplayed messages/memos are played first. Playback will then stop. You can then enter playback mode again to hear all ‘old’ messages. From the Base Unit Use the PLAY/STOP to start and stop playback of messages and memos.
  • Page 10: Headset Operation

    Headset Operation Your VT2458 Handset is equipped with a 2.5mm Headset Jack for use with an optional accessory Headset for hands-free operation. If you choose to use the Headset option, you must obtain an optional accessory Headset, which is compatible with the VT2458.
  • Page 11: In Case Of Difficulty

    In Case Of Difficulty If you have difficulty operating your phone, the suggestions below should solve the problem. If you still have difficulty after trying these suggestions, call VTech Communications at 1-800-595-9511. In Canada, call VTech Telecommunications at 1-800-267-7377. The Phone Doesn't Work At All •...
  • Page 12: Warranty Statement

    • If the Product failure is not covered by this limited warranty, or proof of purchase does not meet the terms of this limited warranty, VTECH will notify you and will request that you authorize the cost of repair prior to any further repair activity. You must pay for the cost of repair and return shipping costs for the repair of Products that are not covered by this limited warranty.
  • Page 13: Fcc, Acta And Ic Regulations

    • In no event shall VTECH be liable for any indirect, special, incidental, consequential, or similar damages (including, but not limited to lost profits or revenue, inability to use the product, or other associated equipment, the cost of substitute equipment, and claims by third parties) resulting from the use of this product.
  • Page 14 If advance notice is not practical, you will be notified as soon as possible. You will be given the opportunity to correct the problem and the telephone company is required to inform you of your right to file a complaint FCC, ACTA and IC Regulations with the FCC.
  • Page 15: The Rbrc Seal

    VTech product service centers. Please call 1-800-8-BATTERY™ for information on Ni-Cd battery recycling and disposal bans/restrictions in your area. VTech’s involvement in this program is part of its commitment to protecting our environment and conserving natural resources.
  • Page 16: Table Of Contents

    A member of THE VTECH GROUP OF COMPANIES. Distributed in the U.S.A. by VTech Communications Inc.; Beaverton, Oregon. Distributed in Canada by VTech Telecommunications Canada Ltd., Suite 200, 7671 Alderbridge Way, Richmond, B.C. V6X 1Z9. Copyright 2002 for VTECH TELECOMMUNICATIONS LTD.

Table of Contents