Auto Mate AM6.2 Installation Manual page 29

3. Transmit. The transmitter is used to select the desired setting. As shipped,the default fea-
tures will be in bold in the feature menu. If the feature menu has only two options to
choose from, the LED will either turn on or off. On features with multiple choices you will
get light flashes indicating which option has been chosen.
4. Release. The Program switch can now be released.
You can advance from feature to feature by pressing and releasing the Program switch the number of times nec-
essary to get from the feature you just programmed to the feature you wish to access. For example, if you just
programmed the run time (Feature 3) and you next want to program parking lights (Feature 4) to flashing, release
the Program switch. Press and release it once to advance from Feature 3 to Feature 4. Then press it once more
and HOLD it. The LED will flash in groups of 4 to confirm that you have accessed Feature 4.
The learn routine will be exited if any of the following occurs:
■ The ignition is turned on.
■ The Program switch is pressed too many times.
■ More than 25 seconds elapses between programming steps.
© 2007 Directed Electronics—all rights reserved
29