Using Userpro - NEC UNIVERGE SV8100 User Manual

Using UserPro

Using UserPro
The WebPro software is installed on the CPOO PCB - there is no separate software installation. This means that when the tele-
phone system software is updated, the UserPro software is updated as well.
With either Internet Explorer or Netscape Navigator installed:
1. Open the internet browser application. When using a remote ISDN dial up connection, Local USB connection or Local
Serial connection you must first connect to the telephone system using the dial-up connection. If not already connected,
click on START SETTINGS + NETWORK CONNECTIONS
+
telephone system.
2. Enter the IP address of the SV8100 system. This address is selected based on the type of connection to the SV8100.
Remote ISDN Connection
Local LAN (Ethernet)
3. When the connection to the system is made, you'll see the opening page requesting a user name and password.
4. The default settings are:
The passwords are case-sensitive and must be entered as shown.
5. After making changes in a window, click on the APPLY icon to accept the changes. The system is immediately updated.
6. When you wish to exit UserPro, you MUST click LOGOUT from the Home page in order to log out of the system.
Notes:
• The UserPro software provides a Help system if you experience difficulty in using the program. Simply press the
'F1' key.
• When accessing via remote dial up, USB or Serial the screen refresh will be much slower than a Local LAN con-
nection.
UserPro Manual
192.78.0.3
192.168.0.10
User Name
user1 1111 (UA Level)
(extension 1111 (UB Level)
number)
select the dial up connection to be used to connect to the
+
Fixed - cannot be changed.
This setting is defined in Program 10-12-01
and can be changed.
Password
Using UserPro
13