NEC UNIVERGE SV8100 User Manual page 15

7. Enter the Telephone System User Name and Password to be used for most sessions. Click in the box SAVE THIS USE
NAME AND PASSWORD. This will allow these settings to be used when connecting to the SV8100. The table below
shows the default SV8100 user name and password settings. These can be redefined in Program 90-02.
8. Click on PROPERTIES. In the PROPERTIES window that appears, select the SECURITY tab.
9. Select the ADVANCED (CUSTOM SETTINGS) button, then click on SETTINGS.
10. In the ADVANCED SECURITY SETTINGS window, make the following changes and then click OK.
• Data Encryption: Set to "No Encryption Allowed"
• Logon Security: Should not be checked
UserPro Manual
Creating a Dial Up Setting for Remote Access
User Name
user1 1111 (UA level)
(Extension 1111 (default - UB level)
number)
Password
11