Inserting And Ejecting A Disc; Adjusting The Lcd Panel Angle - Pioneer SPH-DA210 Operation Manual

About AppRadio
6 Back button (for Android devices and
MirrorLink devices)
• Press the Back button to return the pre-
vious screen. The Back button is availa-
ble while running the AppRadio app or
other supported applications.
• The Back button may be disabled by
some models of the connected
MirrorLink device.

Inserting and ejecting a disc

WARNING
• Keep hands and fingers clear of this prod-
uct when opening, closing, or adjusting the
LCD panel.
Be especially cautious of children's hands
and fingers.
• Do not use with the LCD panel left open. If
the LCD panel is left open, it may result in
injury in the event of an accident.
CAUTION
• Do not open or close the LCD panel by
force. This may cause a malfunction.
• Do not operate this product the LCD panel
has completely opened or closed. If this
product is operated while the LCD panel is
opening or closing, the LCD panel may stop
at that angle for safety.
• Do not place a glass or can on the open
LCD panel. Doing so may break this prod-
uct.
• Do not insert anything other than a disc in-
to the disc-loading slot.
1 Press and hold the Eject button to open
the LCD panel and eject the disc-loading
slot .
2 Insert or remove a disc.
3 Press the Eject button to retract the
disc-loading slot and close the LCD panel.

Adjusting the LCD panel angle

WARNING
Keep hands and fingers clear of the product
when opening, closing, or adjusting the LCD
panel. Be especially cautious of children's
hands and fingers.
CAUTION
Do not open or close the LCD panel by force.
This may cause a malfunction.
1 Press the Eject button to display the
flap menu screen.
2 Tap or to adjust the angle.
The angle can be adjusted on a level of zero to
five both for the tilt down and up positions.
3 Tap to close the flap menu screen.
❐ You can also insert and eject a disc by tap-
ping on the flap menu screen.
Chapter
02
9
En