Setting The Rca Output; Selecting The System Language - Pioneer SPH-DA210 Operation Manual

Chapter
Customizing preferences
14

Setting the RCA output

This product's preout (RCA rear output or
subwoofer output) can be used for a full-range
speaker (Full) or subwoofer (Subwoofer)
connection.
Initially, the product is set for a subwoofer
connection (Subwoofer).
" Preout " can be set only when the source
❐
is set to " OFF ".
1 Display the "System" screen.
Ü For details, refer to Customizing the
system settings on page 63.
2 Tap [Preout].
Tapping [Preout] changes the settings as
follows:
• Subwoofer (default):
When a subwoofer is connected to the
RCA rear output, select "Subwoofer".
• Full:
When no subwoofer is connected to the
RCA rear output, select "Full".
❐ Even if you change this setting, there will
be no output unless you turn the subwoofer
output on.
Ü For details, refer to Using the subwoofer
output on page 61.
❐ If you change this setting, subwoofer
output in the audio menu will return to the
factory settings.
64
En

Selecting the system language

The system language can be selected from
three languages.
❐ If the embedded language and the selected
language setting are not the same, text in-
formation may not display properly.
❐ Some characters may not be displayed
properly. Text that cannot be displayed is
displayed as "_" (underscore).
1 Display the "System" screen.
Ü For details, refer to Customizing the
system settings on page 63.
2 Tap [System Language].
The "System Language" screen appears.
3 Tap the desired language.
English (default), Français, Español