Updating Bluetooth Connection Software; Displaying The Bluetooth System Version; Setting The Rear View Camera - Pioneer SPH-DA210 Operation Manual

Chapter
Customizing preferences
14
Updating Bluetooth connection
software
This function is used to update this product
with the latest software. For information on
the software and updating, refer to our web-
site.
CAUTION
Never turn this product off while the Bluetooth
memory is being updated.
" Bluetooth Software Update " can be set
❐
only when the source is set to " OFF ".
1 Display the "System" screen.
Ü For details, refer to Customizing the
system settings on page 63.
2 Tap [Bluetooth Software Update].
The "Bluetooth Software Update" screen
appears.
3 Tap [Start] to display the data transfer
mode.
Follow the on-screen instructions to finish
■
updating the software.
Displaying the Bluetooth system
version
If this product fails to operate properly, you
may need to consult your dealer for repair. In
such cases, you may be asked to specify the
system version. Perform the following proce-
dure to check the version of this product.
" Bluetooth Version Information " can be
❐
set only when the source is set to " OFF ".
1 Display the "System" screen.
Ü For details, refer to Customizing the
system settings on page 63.
2 Tap [Bluetooth Version Information] to
display to the version of the Bluetooth
module of this product.
66
En

Setting the rear view camera

The following two functions are available. The
rear view camera feature requires a separately
sold rear view camera (e.g. ND-BC6). (For de-
tails, consult your dealer.)
Rear view camera
This product features a function that automat-
ically switches to the full-screen image of the
rear view camera installed on your vehicle.
When the shift lever is in the REVERSE (R) po-
sition, the screen automatically switches to a
full-screen rear view camera image.
Camera for Rear view mode
Rear view can be displayed at all times (e.g.
when monitoring an attached trailer, etc.).
Please be aware that with this setting, the
camera image is not resized to fit, and a por-
tion of what is seen by the camera is not view-
able.
When the "Camera Polarity" setting is set,
[Rear view] icon on the Home screen be-
comes active and "OFF" appears on the upper
right corner of the icon.
To switch to the rear view mode, tap [Rear
view].
❐ In the rear view mode, "ON" appears on the
upper right corner of the icon.
❐ To cancel the rear view mode, tap [Rear
view] again.
❐ Tapping the screen while displaying the rear
view screen returns to the current screen.
❐ In the rear view mode, if you do not touch
the screen for seven seconds while display-
ing the following screens, the screen
switches to the rear view screen automati-
cally.
• Source (Radio, iPod, Apps, MirrorLink,
Pandra, Bluetooth or Disc) screens
• Source off screen
• AppRadio Mode screen