Checking The Connections Of Leads; Switching The App Launch Assist; Function (For Iphone) - Pioneer SPH-DA210 Operation Manual

Customizing preferences
2 Tap [System Reset].
A message confirming whether to restore the
settings appears.
3 Tap [OK].
If you do not want to restore the settings,
■
tap [Cancel].

Checking the connections of leads

Check that leads are properly connected be-
tween this product and the vehicle. Please al-
so check whether they are connected in the
correct positions.
1 Display the "System" screen.
Ü For details, refer to Customizing the
system settings on page 63.
2 Tap [Connection Status].
The "Connection Status" screen appears.

2
3
 GPS Antenna
Indicates the connection status of the GPS
antenna, the reception sensitivity, and from
how many satellites the signal is received.
Color Signal
communication
Orange Yes
Yellow Yes
❐ When the GPS antenna is connected to
❐ If reception is poor, please change the in-
2 Positioning Status
Indicates the current GPS positioning sta-
tus.
• 2D Positioning:
• 3D Positioning:
3 Back Signal
When the shift lever is shifted to "R", the
signal switches to "High" or "Low". (One
of these is displayed depending on the ve-
hicle.)

Switching the App launch assist

function (for iPhone)

You can set whether to launch the AppRadio
app automatically when you tap [Apps] icon
on the Home screen.
1 Display the "System" screen.
Ü For details, refer to Customizing the
2 Tap [App launch assist].
Tapping [App launch assist] changes the set-
tings as follows:
• On (default):
• Off:
Used in
positioning
Yes
No
this product, "OK" is displayed.
When the GPS antenna is not connected
to this product, "Not OK" is displayed.
stallation position of the GPS antenna.
The status when the signals from three
satellites are received.
The status when the signals from four or
more satellites are received.
system settings on page 63.
Activates the App launch assist function.
Deactivates the App launch assist func-
tion.
Chapter
14
69
En