Notes On Using The Lcd Panel; Adjusting The Lcd Panel Angle; Inserting/Ejecting/Connecting Media - Pioneer AVH-4200NEX Owner's Manual

Basic operation
Attaching the front panel
1 Slide the front panel into the top of the product
and push it into place.
Slide the inserter on the front panel into the insertion slot on top
of the unit and push it into place.
2 Push on the bottom of the front panel until it
clicks into place.

Notes on using the LCD panel

WARNING
 Keep hands and fingers clear of this product when
opening, closing, or adjusting the LCD panel. Be especially
cautious of children's hands and fingers.
 Do not use with the LCD panel left open. It may result in
injury in the event of an accident.
CAUTION

Do not open or close the LCD panel by force. It may cause
a malfunction.
 Do not operate this product until the LCD panel has
completely opened or closed. If this product is operated
while the LCD panel is opening or closing, the LCD panel
may stop at that angle for safety.

Do not place a glass or can on the open LCD panel.

Adjusting the LCD panel angle

1 Press the button.
2 Touch or to adjust the angle of the
LCD panel.
3 Touch .
Returns to the previous screen.
Inserting/ejecting/connecting
media
CAUTION
 Do not insert anything other than a disc into the disc-
loading slot.
 Do not insert anything other than SD memory cards into
the SD card slot.

Ejecting an SD memory card during data transfer can
damage the SD memory card. Be sure to eject the SD
memory card by the procedure described in this manual.

Do not press the button when an SD memory card is not
fully inserted. Doing so may damage the card.
 Do not press the button before an SD memory card has
been completely removed. Doing so may damage the card.
Inserting and ejecting a disc
Inserting a disc
1 Press the button.
2 Touch to open the LCD panel.
3 Insert a disc into the disc-loading slot.
Ejecting a disc
1 Press the button.
2 Touch to open the LCD panel.
3 Remove the disc, and press the
Inserting and ejecting an SD memory
card
p This system is not compatible with the Multi Media Card
(MMC).
p Compatibility with all SD memory cards is not guaranteed.
p This product may not achieve optimum performance with
some SD memory cards.
Inserting an SD memory card
1 Press the button.
2 Touch to open the LCD panel.
3 Insert an SD memory card into the SD card
slot.
4 Press the button.
Ejecting an SD memory card
1 Press the button.
2 Touch to open the LCD panel.
3 Press the middle of the SD memory card gently
until it clicks.
4 Pull the SD memory card out straight.
5 Press the button.
button.
9