Pairing From Your Bluetooth Devices; Deleting A Registered Device - Pioneer SPH-DA210 Operation Manual

Registering and connecting a Bluetooth device
Pairing from your Bluetooth devic-
es
You can register a Bluetooth device by setting
this product to standby mode and requesting
connection from the Bluetooth device.
❐ Before registration, make sure that
"Visibility" in the "Bluetooth Connection
Menu" is set to "On".
Ü For details, refer to Switching product
visibility on page
1 Activate the Bluetooth wireless technol-
ogy on your devices.
For some Bluetooth devices, no specific action
is necessary to activate Bluetooth wireless
technology. For details, refer to the instruction
manual of your devices.
2 Use the Bluetooth setting in the device
to pair this product with device.
❐ The device name is "AppRadio SPH-
DA210".
❐ If a PIN code input is required, enter a PIN
code. (The default PIN code is "0000".)
When the device is successfully registered,
the connection settings are made from the
device.
❐ If registration fails, repeat the procedure
from the beginning.
36
.

Deleting a registered device

When you have already registered three
Bluetooth devices and you want to add anoth-
er one, you must first delete one of the regis-
tered devices.
❐ If a registered phone is deleted, all the
phone book entries and call history lists
that correspond to the phone will be also
cleared.
1 Tap on the Home screen.
Ü For details, refer to Home screen on page
14.
The phone menu screen appears.
2 Tap on the phone menu.
The "Bluetooth Connection Menu" screen
appears.
3 Tap [Connection] on the "Bluetooth
Connection Menu".
The registered device list screen appears.
Chapter
08
33
En