K-array KA10-10 User Manual page 3

KA10-10
2. INTRODUCTION
The KA professional rack amplifier line has been designed to give answers to all the needs of touring and installation
applications in which a large amount of power is needed together with the maximum flexibility, over low sizes and weight. The
sophisticate electronics on-board allow to reach outstanding output power levels with over-high efficiency. DSP on-board (except
in model "N") can provide perfect signal processing for all K-array products, providing safe working conditions and a large
choice of dedicated presets to solve the most parts of the needs of high-end applications. A dedicated remote control ensures a
constant connection with all the units, allows the total management of the presets installed and the possibility of the download of
3. VOLTAGE REQUIREMENTS
KA 10 operates safely and without audio discontinuity if the AC voltage stays within either of two operating windows:
(voltage selector on 115 V) or 195-250 V (voltage selector on 230 V), at 50 or 60 Hz.
The device is default set to be connected to 230 V AC Power. To use the device on a 115 V AC Power you need, before connecting it,
to move the voltage selector's cover
sure that both voltage set on the selector and AC Power have the same value . Always close the voltage selector's cover before
connecting the device to AC Power. Change the label that points out the correct voltage in use..
USER'S MANUAL
, just loosening the two screws, and to choose the correct use voltage by the red switch. Be
!
115-230
CAUTION
Connecting a 115V system on a 230V AC Power causes heavy
damages to the device and serious risk for users .
9 5 - 1 2 5
P. 3