K-array KA10-10 User Manual page 29

ENGLISH
Once the settings are finished you have to store them to the eeprom by clicking on
Store to eeprom (F11) in the 'Preset' menu.
To save the preset you have made click save on the 'Preset' menu.
To load a previously stored preset click load on the 'Preset' menu.
To send a preset to all the connected modules click load to all in the 'Preset' menu.
To send and store the same preset to all the connected modules click load and store
to all in the 'Preset' menu.
To load and store at once a preset on the actual eDSP click on load and store to
node in
the 'Preset' menu.
If you want to send one preset to different groups of IDs click send preset to ID in the
preset menu.
21