Related Manuals for K-array Kommander-KA04
Summary of Contents for K-array Kommander-KA04
- Page 1 USER GUIDE Kommander-KA04 Aluminum 600W compact amplifier and processing solution •20230228•...
- Page 2 This page intentionally left blank...
- Page 3 Kommander-KA04 USER GUIDE General heed and warnings IMPORTANT SAFETY INSTRUCTIONS • Read these instructions. • Keep these instructions. • Heed all warnings. • Follow all instructions. • Do not use this apparatus near water. • Clean only with dry cloth.
- Page 4 This device complies with Industry Canada’s licence-exempt RSSs. Operation is amplifier’s rated range can damage the apparatus. subject to the following two conditions: • K-array cannot be held responsible for damage caused by improper use of the • this device may not cause interference, and loudspeakers.
-
Page 5: Table Of Contents
Kommander-KA04 USER GUIDE Index Unpacking Dashboard Kommander-KA04 Rear Panel USB Media Player Software Bluetooth Media Player Introduction Webradio Media Player K-array Connect Mobile App DanteReady™ streamer Getting Started Device preset Mounting and cooling Audio Configuration AC MAINS supply Output Configuration... - Page 6 Kommander-KA04 USER GUIDE This page intentionally left blank...
- Page 7 K-array distributor in your country. The Kommander-KA04 is a fully featured 4x 150W @ 4Ω class-D amplifier with a high-performing DSP. The digital processing multi-channel amplifier is designed for optimized performance in small to medium loudspeaker systems.
-
Page 8: Unpacking
USER GUIDE Unpacking Kommander-KA04 Rear Panel Each K-array amplifier is built to the highest standard and thoroughly inspected before leaving the factory. Upon arrival, carefully inspect the shipping carton, then examine and test your new amplifier. If you find any damage, immediately notify the shipping company. -
Page 9: Introduction
USER GUIDE Introduction Getting Started The Kommander-KA04 is a 1RU amplifier unit with an incredibly 1. Connect the input and output signal cables according to compact size of 219 x 46 x 320 mm (8.6 x 1.8 x 12.6 in), full the configuration you want to achieve. -
Page 10: Mounting And Cooling
USER GUIDE Mounting and cooling Install the amplifier in a well-ventilated location: the ventilation The Kommander-KA04 amplifier and processing unit can be set openings must not be impeded by any item. stand alone or installed into rack cabinets with the K-RACK24 Fresh air enter the amplifier from the bottom plate, warm air is rack-mounting hardware accessory. -
Page 11: Input Wiring
USER GUIDE Input wiring Loudspeaker wiring Audio signals can be fed to the Kommander-KA04 amplifier unit A minimum set of Euroblock flying connectors is provided in the using the input connectors on the rear panel. package for connecting the loudspeakers to the amplifier unit. -
Page 12: K-Remuctrl Remote
Once the K-REMUCTRL’s dongle in plugged to the amplifier, the control the Kommander-KA04 amplifier unit. the logo of the remote will appear in the upper right corner of In order to use the K-REMUCTRL with the Kommander-KA04 the embedded web app interface. amplifier: Remote settings 1. -
Page 13: Remote Connectivity
DHCP server. Kommander-KA04 on a local network or wireless via its built-in In case a DHCP server is not present on the LAN, the unit goes hot spot and access the web app with a web browser (Google in AutoIP mode: in few seconds the amplifier automatically self- Chrome recommended). -
Page 14: K-Array Connect Mobile App
Access the 4. Click on the image of the Kommander-KA unit to manage the embedded web app amplifier with the K-array Connect app or click on the button List of available devices in the with the globe in order to lanch the embedded web app. -
Page 15: Embedded Web App
The web app is accessible via a web browser (Google Chrome recommended) over a wired or wireless connection to the amplifier unit. The K-array Connect Mobile App and the K-framework3 software interfaces include a shortcut for opening the web app, once... -
Page 16: Audio Configuration
(eg. the Lyzard-KZ14I matching the Truffle-KTR25). 7. Apply the output channel configuration. The Output Configuration is where the K-array loudspeaker 8. Go to the Routing section and set the proper signal routng. factory presets can be loaded on the output channels. -
Page 17: Matrix
By default, the SSID of the HOT SPOT is composed by the word “K-array-” followed by the serial number of the unit; the default password is the unit’s serial number. The SSID and the password of the HOT SPOT can be modified manually: the QR Code will change accordingly. -
Page 18: Advanced
2. The Download button turns active when a new software version is available on K-array server: when active, press on the Download button to start downloading the software from the Internet. This step doesn’t install the software: the installation shall be actiated manually. -
Page 19: K-Framework3
Kommander-KA04 USER GUIDE K-framework3 B. Open the K-array website on the Internet browser on your PC or Mac. The Kommander-KA04 unit can be remotely controlled with the C. Navigate the Products->Software menu and scroll down to dedicated K-framework3 software available for PC and MAC on the Download section of the Software webpage. -
Page 20: Service
In both cases, in order to discover and sync the 2. Contact the official K-array distributor in your country: active devices, both the PC or Mac running the K-framework3 find the Distributors and Dealers list on K-array website. -
Page 21: Mechanical Drawing
Kommander-KA04 USER GUIDE Mechanical Drawing 251mm 9,9in 219mm 320mm 8,6in 12,6in... -
Page 22: Specifications
Bluetooth 4.1 Low Energy, Wi-Fi IEEE 802.11 b/g/n Grouping, Input EQ, Output EQ, Signal Routing, Level Built-in DSP adjustment, Dynamic Limiters, Delay Wi-Fi dedicated K-array Connect mobile app Remote control Ethernet wired K-framework3 multiplatform design and tuning software MAINS Operating Range... - Page 24 Designed and Made in Italy K-ARRAY surl Via P. Romagnoli 17 | 50038 Scarperia e San Piero - Firenze - Italy ph +39 055 84 87 222 info@k-array.com www.k-array.com...