Table of Contents
Advertisement
Before use
After you install your telephone or
power returns following a power outage,
the handset will prompt you to set the
date and time.
If you choose to set up the date and
time at a later stage, you can do it
manually.
Set date and time
NOTE
•
Make sure you set the date and time
including the year correctly; otherwise the
answering system does not announce the
correct day of the week for your recorded
messages time stamp.
1.
Use the dialing keys (0-9) to enter the
month, date, and year, and then press
NEXT
.
2.
Use the dialing keys (0-9) to enter the
hour and minute.
to choose AM or PM, and then
3.
Scroll to choose
SAVE
press
to save.
Check for a dial tone:
Press /HOME. If you hear a dial tone,
the installation is successful.
If you do not hear a dial tone:
•
Make sure the installation procedures
described above are properly done.
•
It may be a wiring problem. If you
have changed your telephone
service to digital service from a
cable company or a VoIP service
provider, the telephone line may need
to be rewired to allow all existing
telephone jacks to work. Contact your
cable/VoIP service provider for more
information.
Operating range
This cordless telephone operates with
the maximum power allowed by the
Federal Communications Commission
(FCC). Even so, this handset and
telephone base can communicate over
only a certain distance - which can
vary with the locations of the telephone
base and handset, the weather, and the
layout of your home or office.
When the handset is out of range, the
handset displays Out of range OR no
power at base and Put HS on base to
power base alternately.
If there is a call while the handset is out
of range, it may not ring, or if it does
ring, the call may not connect well when
you press /HOME,
/CELL 2. Move closer to the telephone
base, and then press /HOME or
/CELL 1, or
the call. If the handset moves out of
range during a telephone conversation,
there may be interference. To improve
reception, move closer to the telephone
base.
11
/CELL 1, or
/CELL 2. to answer
Advertisement
Table of Contents
