Table of Contents
Advertisement
Call waiting on the home line
When you subscribe to call waiting
service with your telephone service
provider, the handset flashes
hear a beep if someone calls while you
are already on a call.
Press FLASH on the handset or
•
telephone base to put your current
call on hold and take the new call.
Press FLASH on the handset or
•
telephone base at any time to switch
back and forth between calls.
Make a cell call
/CELL 1 or
1.
Press
the handset or telephone base.
2.
Enter the telephone number, and
then press
/CELL 1,
DIAL
to dial.
The screen displays Unable to
•
complete call. Check cellular. if
your cell phone is in use.
NOTES
•
The handset or telephone base shows
the elapsed time as you talk (in hours,
minutes and seconds).
While entering numbers, press DELETE
•
to make corrections; press and hold
PAUSE to insert a dialing pause (a p
appears).
•
While using the cell line, place your cell
phone closer to the telephone base, and
make sure that there are no physical
obstacles such as large furniture or thick
walls between the telephone base and the
cell phone.
and you
/CELL 2 on
/CELL 2 or
25
Predial a cell call
1.
Enter the telephone number.
/CELL to dial.
2.
Press
NOTES
•
The screen displays Unable to complete
call. Check cellular. if your cell phone is
in use.
•
The handset or telephone base shows
the elapsed time as you talk (in hours,
minutes and seconds).
•
While entering numbers, press DELETE
to make corrections; press and hold
PAUSE to insert a dialing pause (a p
appears).
Answer a cell call
/CELL 1,
Press
/HOME, , or any dialing key (0-9,
or
) to answer.
NOTE
You can also use your cell phone to answer
the call. If you answer with your cell phone, it
will disconnect from the telephone base.
End a cell call
Press OFF on the handset or
/CELL 1,
/CELL 2 on the telephone
base, place the handset in the
telephone base or handset charger.
Call waiting on the cell line
When you subscribe to call waiting
service with your cell phone service
provider, the handset flashes
you hear a beep if someone calls while
you are already on a call.
•
Press
/CELL 1 or
the handset or telephone base to put
your current call on hold and take the
new call.
•
Press
/CELL 1 or
the handset or telephone base at
any time to switch back and forth
between calls.
/CELL 2,
and
/CELL 2 on
/CELL 2 on
Advertisement
Table of Contents
