Charge The Battery - VTech DS6291 User Manual

Charge the battery

Place the handset in the telephone base
or the charger to charge.
CHARGE light
remains on when
charging.
Once you have installed the battery,
the handset LCD display indicates the
battery status (see the table below).
NOTES
• For best performance, keep the handset in the
telephone base or charger when not in use.
• The battery is fully charged after 12 hours
of continuous charging.
• If you place the handset in the telephone
base or the charger without plugging in the
battery, the screen displays No battery.
Battery Battery
indicators status
The screen The battery
is blank, has no or
or displays very little
Place in
charge. The
charger handset
and cannot be
flashes. used.
The screen The battery
displays has enough
Low
charge to be
battery and used for a
flashes. short time.
The screen The battery
displays is charged.
HANDSET
X.
When it is fully charged, you can expect
the following performance:
* Operating times vary depending on your actual
** Handset is not charging or in use.
Action
Charge
without
interruption
(about 30
minutes).
Charge
without
interruption
(about 30
minutes).
To keep
the battery
charged,
place it in the
telephone
base or
handset
charger when
not in use.
10
Operation
While in handset
use (talking*)
While in
speakerphone
mode (talking*)
While not in use
(standby**)
use and the age of the battery.
Operating time
Seven hours
Three hours
Seven days