Table of Contents
Advertisement
Connect
You can choose to connect the telephone
base for desktop usage or wall mounting.
NOTES
•
Use only the adapters provided.
•
Even if you do not subscribe to any
conventional telephone service, you can
pair a Bluetooth enabled cell phone to
your telephone base (see Bluetooth), and
use the cell line alone without plugging in
a telephone line cord.
•
Make sure the electrical outlets are not
controlled by wall switches.
•
The adapters are intended to be correctly
oriented in a vertical or floor mount
position. The prongs are not designed to
hold the plug in place if it is plugged into a
ceiling, under-the-table or cabinet outlet.
TIP
•
If you subscribe to digital subscriber line
(DSL) high-speed Internet service through
your telephone line, make sure you install
a DSL filter (not included) between the
telephone line cord and telephone wall
jack. Contact your DSL service provider
for more information.
Connect the telephone base
Connect the charger
Mount the telephone base
The telephone comes ready for tabletop
use. If you have already installed the
telephone for tabletop use, unplug the
telephone line cord from the telephone
wall jack, and unplug the telephone
base power adapter from the wall outlet
before mounting your telephone on a
wall. Follow the steps below to mount
your telephone on a wall.
1.
Press down on the tabs on the wall
mount bracket on the telephone base
to release it from tabletop orientation.
8
Advertisement
Table of Contents
