Dial Mode - VTech DS6291 User Manual

5. Use the dialing keys to enter the
desired cell area code.
DELETE on the handset, or
• Press
X/DELETE on the telephone base
to erase a digit.
Press and hold DELETE on the
•
handset, or X/DELETE on the
telephone base
6. Press SAVE to confirm. There is a
confirmation tone. The handset screen
shows Areacode will not show in
CID and the telephone base screen
shows Area code will not show in
Caller ID log briefly before returning
to the previous menu.
to erase all digits.

Dial mode

The dial mode is preset to touch-tone
dialing. If you have pulse (rotary)
service, you must change the dial
mode to pulse dialing before using the
telephone to make a call.
MENU
1. Press
main menu.
2. Press or
CALLER ID /
on the telephone base to scroll to
Settings, then press SELECT.
3. Press or
CALLER ID /
the telephone base to scroll to Dial
mode, then press SELECT.
4. Press or
CALLER ID /
on the telephone base to highlight
Touch-tone or Pulse, then press
SELECT. There is a confirmation
tone and the screen returns to the
previous menu.
22
in idle mode to enter the
on the handset, or
or PHONEBOOK /
on the handset, or
or PHONEBOOK /
on the handset, or
or PHONEBOOK /
on