Glossary Of Terms - VTech DS6291 User Manual

Glossary of terms

Below are some terms used in this
user's manual to help you become
familiar with using your Bluetooth enabled
cell phone and your new DS6291
telephone system.
Bluetooth cell phone - refers to a
Bluetooth enabled cellular telephone.
Cell line - the telephone line associated
with your cell phone service. On your
DS6291 handset, press
the cell line.
Connected - when you pair a Bluetooth
cell phone to the DS6291, it is
automatically connected. When a cell
phone is connected, 1 and/or 2 displays
after on the handset and the
1 and/or CELL 2/HEADSET light on
the telephone base is on. If a cell phone
loses its connection to the telephone
base, it must be reconnected before you
can use the cell phone with the DS6291.
Disconnected - when a cell phone is
disconnected, the
no longer displays and the
and/or CELL 2/HEADSET light on
the telephone base is off.
Discoverable mode - before a
Bluetooth enabled device can be paired,
it must be set to this mode. When
pairing your cell phone, the telephone
base will be set to this mode. Depending
on the manufacturer, this mode is
sometimes referred to as Find Me or
Visibility.
Home line - your conventional
telephone land line. On your DS6291
handset, press
use the home line.
/CELL to use
CELL
on the handset
CELL 1
/HOME/FLASH to
Paired device - once a Bluetooth
enabled cell phone has been paired
with the telephone base, it appears
on the cell devices list. A maximum of
two cell phones can be paired with the
telephone base.
Pairing - this refers to the process of
Bluetooth enabled cell phone registering
device information with each other.
The telephone base must be paired
with the Bluetooth enabled cell phone
before it can be used. Depending on the
manufacturer, this is also referred to as
Bonding.
PIN - by default, the PIN is 0000 for the
telephone base and for most Bluetooth
devices. PIN information must be
exchanged between Bluetooth devices
before they can be used. This is also
known as a Passkey or Passcode.
13