Ubee DDW3612 User Manual page 51

Ubee Interactive
DDW3612 Subscriber User Guide • July, 2010
NPHY Rate
802.11n Protection
Multicast Rate
Apply
Set the Physical Layer (NPHY) rate. These rates are only
applicable when the 802.11n mode is configured as Automatic.
If you select Auto, the DDW3611 will use Request to
Send/Clear to Send (RTS/CTS) to improve the performance in
802.11 mixed environments. If you select Off, the 802.11
performance will be maximized under most conditions, while the
other 802.11 modes (802.11b, etc.) will be secondary.
Specify the rate at which multicast packets are transmitted and
received on your wireless network.
Click to submit changes.
3.8 Wireless
47