Gateway - Port Filtering - Ubee DDW3612 User Manual

3.7 Gateway
3.7.10
The Port Filtering option allows you to configure port filters in order to block specific
internet services on specific ports to all devices on the LAN.
1. Access the web interface. Refer to
2. Click the Gateway link from the top of the screen.
3. Click Port Filtering from the left side of the screen. The Port Filtering fields are
explained following this screen example.
Label
30

Gateway - Port Filtering

Start Port
End Port
Protocol
Enabled
Apply
page 7, if needed.
Description
Enter the start port.
Enter the end port.
Select the protocol type, or select Both for UDP and TCP.
Select Enabled to active the rule and filter out all traffic on the
specified ports.
Click Apply to save all screen changes.
DDW3612 Subscriber User Guide • July, 2010
Ubee Interactive