Checking The Blades - Husqvarna Rider Pro 18 Operator's Manual

Checking the blades

To achieve the best mowing results it is important
that the blades are undamaged and well-
sharpened.
Check that the blades' attachment screws are tight.
IMPORTANT INFORMATION
Replacing or sharpening the blades should
be conducted by an authorised service
workshop.
The blades should be balanced after sharpening.
Damaged blades should be replaced when hitting
obstacles that result in a breakdown. Let the
servicing dealer judge whether the blade can be
repaired/ground or must be discarded.
IMPORTANT INFORMATION
BioClip 90 and Combi unit 103 should
always have the blades in the relative
position shown in the diagrams with an
angle of 90° between the blades. Otherwise
the blades can go against each other and
damage the unit.
BioClip 90
MAINTENANCE
Combi 103
Combi 112
Cutting unit with rear ejection 97
Cutting unit with side ejection 97
90° 90°
53
English –