Replacing The Air Filter Pro 15 - Husqvarna Rider Pro 18 Operator's Manual

Replacing the air filter Pro 15

If the engine seems to lack power or runs
irregularly, the reason may be a clogged air filter.
It is therefore important to replace the air filter at
regular intervals (see "Maintenance schedule" for
correct service interval).
WARNING!
Let the muffler system cool down
before carrying out service work.
Otherwise there is a risk of burns.
Clean/ replace the air filter as follows:
1. Remove the air cleaner case from the air
cleaner body by pushing down the latches with
fingers.
IMPORTANT INFORMATION
Never run the engine without the muffler
fitted.
Do not use compressed air to clean the
paper filter. Do not wash the paper filter.
The filters must not be oiled. They must be
fitted dry.
2. Lift out the paper element and the foam
element from the air cleaner case.
3. Clean the foam element by washing it in
detergent and water.
4. Dry the foam element thorougly.
5. Clean the paper element by tapping gently to
remove dust. If the element is very dirty, replace
it with a new one.
Always replace the paper element every 200
hours.
6. Reinstall the foam element and the paper
element into the air cleaner case.
7. Reinstall the air cleaner case into the air cleaner
body by putting the hooks on the bottom of the
air cleaner case into the air cleaner body
bottom.
MAINTENANCE
37
English –