Parking Brake; Seat; Fuelling - Husqvarna Rider Pro 18 Operator's Manual

Parking brake

The parking brake is applied as follows:
1. Push down the brake pedal (1).
2. Fully depress the lock button on the steering
column (2).
3. Release the brake pedal while holding the
button pressed.
The parking brake lock disengages automatically
when the brake pedal is pressed.

Seat

The seat has a jointed attachment on the front edge
and can be tipped forward.
The seat can also be adjusted lengthways.
To adjust move the lever under the front edge of
the seat to the left, so that the seat can be moved
forward or backwards to the required position.

Fuelling

The engine runs on unleaded petrol with a
minimum octane rating of 87 (not mixed with oil).
We recommend the use of biodegradable alkylate
petrol. Refer to the "Technical data" for information
on methanol and ethanol fuels.
Do not fill the tank completely, leave an expansion
area of at least 2.5 cm (1").
WARNING!
Petrol is highly inflammable.
Exercise care and refuel outdoors
(see safety instructions).
16
– English
PRESENTATION PRO 15
2
1