Husqvarna Rider Pro 18 Operator's Manual page 60

3. Chains in frame tunnel
Remove the cover from the frame tunnel, see step 2.
Lubricate the chains in the frame tunnel using an oil
can or motorcycle chain spray.
Lubricate the shaft of the control wire pulleys with
grease. Press the rollers to the side and brush the
shaft with grease.
Refit the cover over the frame tunnel.
4. Triangular link and joints
Lubricate the triangular link and the joints on the
cutting height adjustment strut behind the right front
wheel.
Lubricate using oil can.
5. Driver's seat
Tip up the seat.
Lubricate the links to the seat's scissor suspension
with an oil can, 8 lubrication points on Pro 15.
Lubricate the lengthways adjustment mechanism
with an oil can on Pro 15 and Pro 18.
Lubricate the lengthways adjustment runners with
an oil can on Pro 15 and Pro 18.
LUBRICATION
Pro 15
Pro 18
59
English –