Explanation Of Symbols - Husqvarna Rider Pro 18 Operator's Manual

N
R
Reverse Neutral
Oil level Cutting height
Use hearing protection
Noise emission to surroundings in accordance
with the directive of the European Community.
The machine's emission is indicated in the
chapter TECHNICAL DATA and on the decal.
Never use the machine if persons,
especially children, or animals, are in
the vicinity
4
– English

EXPLANATION OF SYMBOLS

These symbols are on the machine and in the instructions.
Study them carefully so that you know what they mean.
Read the instructions.
Fast Slow
Backwards
Hydrostatic freewheel
Warning! Rotating
blades
Never carry passengers on the
machine or equipment
Starting instructions
Read the instructions
Check the engine's oil level
Check the hydrostat's oil level
Lift up the cutting unit
Hydrostatic pedals in neutral position
Brake
If the engine is cold use the choke
Start the engine
Release the parking brake before
driving
Engine off Battery
Forwards
Parking brake
Warning! Risk that the Never drive across
machine can tip over
Keep hands and feet away
from under the hood when
the engine is running
Choke Fuel
Ignition
Brake Warning
CE conformity
marking
a slope
Drive very slowly
without the cutting unit
Speed limiter pedal forwards
Neutral
Speed limiter pedal reverse
Switch off the engine and take off
the ignition cable before repairs or
maintenance