Husqvarna Rider Pro 18 Operator's Manual page 23

3. If the engine is cold move the choke lever
backwards to its end position.
4. Turn the ignition key to the start position.
5. When the engine starts release the ignition key
immediately back to neutral position.
IMPORTANT INFORMATION
Do not run the starter for more than about
5 seconds at a time. If the engine does not
start, wait about 15 seconds before trying
again.
6. Push the choke lever gradually forward when
the engine has started.
7. Set the required engine speed with the throttle
control.
Let the engine run at moderate speed or half
throttle for 3-5 minutes before subjecting it to
heavy load.
When mowing, use 3/4 to full throttle.
WARNING!
Never run the engine indoors, in
enclosed or poorly ventilated
areas. The exhaust fumes con-
tain toxic carbon monoxide.
22
– English
DRIVING PRO 15