Driving The Machine - Husqvarna Rider Pro 18 Operator's Manual

Driving the machine

1. Release the parking brake by pressing the
brake pedal.
2. Carefully press down one of the pedals until the
required speed is obtained.
To drive forward press down pedal (1), or to
reverse pedal (2).
WARNING!
Make sure that branches do not
obstruct the pedals when mowing
under bushes, otherwise you may
lose control.
3. Push in the lock button on the lift lever and
lower down the cutting unit.
IMPORTANT INFORMATION
The life span of the drive belts is increased
significantly if the engine runs at a low
speed when the blades are engaged.
Therefore apply full throttle first when the
cutting unit has been moved to the mowing
position.
4. Select the required cutting height (1–7) with the
cutting height lever.
It is important that the air pressure in both front
wheels is equal, 60 kPa / 8.5 PSI, to produce
an even cutting height.
DRIVING PRO 18
1
2
27
English –