Husqvarna Rider Pro 18 Operator's Manual page 59

2. Pedal mechanism in frame tunnel
Pro 15
Lubricate the pedal mechanism in the frame tunnel.
Remove the cover from the frame tunnel by
undoing the screws, two on each side.
2. Pedal mechanism in frame tunnel
Pro 18
Lubricate the pedal mechanism in the frame tunnel.
Remove the cover from the frame tunnel by
undoing the screws, two on each side.
Pump the pedals and lubricate the moving parts
using an oil can.
Lubricate the wires connected to the brake and
drive pedals using an oil can.
Lubricate as described under "Chains in frame
tunnel" before refitting the cover over the frame
tunnel.
58
– English
LUBRICATION