Stopping The Engine - Husqvarna Rider Pro 18 Operator's Manual

Stopping the engine

Preferably allow the engine to idle for a minute to
obtain normal working temperature before stopping
it if it has been working hard. Avoid idling the
engine for long periods, as there is a risk of carbon
build-up on the spark plugs.
1. Lift up the cutting unit by pulling the lever back
to the locked position.
2. Move the throttle control to the MIN. position.
Turn the ignition key to the STOP.
3. When the Rider is at a standstill, hold down the
parking brake (1) and press in the release
button (2).
28
– English
DRIVING PRO 18