Checking The Fuel Pump's Air Filter; Muffler Air Intake Pro 18; Checking The Transmission's Air Intake - Husqvarna Rider Pro 18 Operator's Manual

Checking of the fuel pump's air filter
Check regularly that the fuel pump's air filter is free
from dirt.
The filter can when necessary be cleaned with a
brush.
1. Remove the two screws that hold the fuel
pump.
2. Prise out the pump without disconnecting the
hoses and clean the filter with a brush.
3. Put the fuel pump back in place.
Muffler air intake
Cleaning the pulse air filter
1. Open the engine cover.
2. Loosen the four quick-action clips and lift off the
cover and remove the filter.
3. Blow out the filter using compressed air.
Replace the filter if it is damaged or cannot be
blown clean.
4. Replace the filter in the cover and secure the
cover using the quick-action clips. Replace the
engine hood.
Check the transmission's air intake
Check that the transmission's air intake in not
blocked.
Remove the transmission cover and clean any
grass cuttings from the transmission's cooling fins if
necessary.
Cooling is impaired if the air intakes are blocked or
the transmission housing is dirty, this can result in
damage to the transmission.
36
– English
MAINTENANCE