Driving The Machine - Husqvarna Rider 20 ProFlex Operator's Manual

5. When the engine starts release the ignition key
immediately back to neutral position.
IMPORTANT INFORMATION
Do not run the starter for more than about
5 seconds at a time. If the engine does not
start, wait about 10 seconds before trying
again.
6. Push the choke lever gradually forward when
the engine has started.
7. Set the required engine speed with the throttle
control.
!
WARNING!
Never run the engine indoors, in
enclosed or poorly ventilated
areas. The exhaust fumes contain
toxic carbon monoxide.

Driving the machine

1. Release the parking brake by pressing the brake
pedal.
2. Carefully press down one of the pedals until the
required speed is obtained.
To drive forward press down pedal (1), or to
reverse pedal (2).
14
– English
DRIVING
1
2