Maintaining The Pegaso; Troubleshooting - Datalogic Pegaso Quick Reference Manual

Maintaining the Pegaso

Maintaining the Pegaso
With normal use, the Pegaso, Dock, and Four-Slot Battery Charger require no
maintenance. For trouble-free service, observe the following tips:
• To prolong its life and avoid problems, keep the Pegaso clean. Use a
clean, soft cloth dampened with a mild, dilute cleanser.
• Clean the display with a lens cloth or other soft cloth dampened with a
mild, dilute cleaning solution.
Never use a pen, pencil, or other sharp object on the display/
touch screen. Use only the supplied stylus or plastic-tipped pens
intended for use with a touch-sensitive screen.
Do not immerse the Pegaso, dock, or battery charger in liquid.
CAUTION
Do not use abrasive paper/cloth or abrasive/corrosive cleaners
to clean the unit.
Do not use a sharp object to Reset; use the Stylus. A sharp
object can puncture the button, disabling the reset function, rup-
turing the industrial seal, and voiding your warranty. Refer to
Resetting the Pegaso
WARNING

Troubleshooting

Refer to the Pegaso PRG for more information.
Table 7. Troubleshooting Problems, Causes, and Solutions
Problem
The Pegaso does
not turn on.
During reset, the
terminal beeps
twice and stays
blank.
28 Pegaso™ Industrial PDA with Windows Mobile
on page 2-26
Possible Cause
The battery pack is
not installed properly.
System failure.
Firmware persistent
flash memory has
been corrupted.
Solution
Ensure the battery is installed properly.
Perform a cold reset. Refer to
Pegaso on page 2-26.
Re-download the firmware using the FUU in
bootload mode. Refer to the PRG.
Resetting the
®