Datalogic Falcon 4423 Quick Start Manual

Parts List
1- PS6D4400UUSE USB, Ethernet, & Serial Charging Cradle
1 - USB Type-A to Type-B Cable (1 meter)
1 - Quick Connect Guide (this document)
1 - CAT5 Ethernet Cable
PS6SMC3000UE
Front
Connect USB
For Local Communication:
Connect the USB Type-A connector to a Type-A
connector on the Host Computer.
Connect the USB Type-B connector to the USB
connector on the cradle.
Local
Host
Computer
Connect 4400
Place the 4400 into the cradle to
charge the Datalogic Falcon.
Problems?
Download the User's Guide and
Troubleshooting Tips from the
Datalogic website at:
www.mobile.datalogic.com. Click
on the SW & Utilities link.
Still having problems?
Contact Technical Support at:
www.mobile.datalogic.com. Click on
the Contact Us link.
Choose
Slide Selector
Switch to choose
Network or USB
communication.
USB Type-A
to
Type-B Cable
Ethernet,
USB, &
Serial
PS6D4400UUSE
Quick Start Guide
Plug the
Standard
115V
Power Cord
into the Power
Adapter
Connect Network
For Network Communication:
Connect one end of the standard Ethernet
cable to the cradle's RJ45 connector and
the other end to your hub, router, switch,
or wall data outlet
Install Ethernet Driver
The Ethernet Cradle Driver is required for network communications with a CAT5 Ethernet cable.
For information on installing and configuring the Ethernet Cradle Driver, refer to steps
on the reverse side.
No other software is required if the default DHCP is used to obtain the cradle's IP address. If a static
IP address or other special network requirement must be configured, you will also need to download
the Cradle Manager software from www.mobile.datalogic.com. Additional information on both programs
is contained in the User Manual, which is also available from the website.
FCC Regulatory Compliancy
FCC Statement
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment
is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required
to correct the interference at his own expense.
CE Statement:
Warning
This is a Class A product. In a domestic environment this product may cause radio interference in which case the user may be
required to take adequate measures.
Charging
Cradles
Connect Power
Plug the barrel connector
into the Cradle's Power
Connector
and
Part Number: 170384-000 Rev A