Datalogic Pegaso Quick Reference Manual page 16

Setting Up the Mobile Computer
3. Select the adapter you are using (available options will vary based on the
radio installed and the number of connections).
4. Complete the two tabs (shown in
Figure 9. Modifying Network Connection Settings.
•
IP Address
•
Name Servers
RF Setup (Summit Client Utility)
The Summit Client Utility (SCU) is an application designed for users and
administrators of mobile devices that use a Summit radio module. Using SCU,
you can:
• Disable and enable the radio (turn it off and on)
• View the contents of configuration profiles, or configs, each of which
houses the RF, security, and other settings for the radio
• Select the config to be used to connect to a WLAN
• View global settings, which apply to every config
• View status information on the radio, the access point (AP) or WLAN
router to which it is connected, and the RF connection or link between
the two
• Troubleshoot a connection or performance issue, view in-depth diagnos-
tic information on the connection and the radio, and perform various
troubleshooting and diagnostic tests
1. To launch the utility go to
2. Tap on the
3. To make setting changes tap
The default password is
For more detailed information on making changes to settings, please refer to the
PRG.
14 Pegaso™ Industrial PDA with Windows Mobile
: Select or set static IP settings.
DHCP
: If using static IP, set
icon.
Wi-Fi
Admin Login
SUMMIT
):
Figure 9
and
DNS WINS
> Settings > Connections.
.
.
servers.
®