Password - Moxa Technologies PT-7728 User Manual

PT-7728 User's Manual

Password

The PT-7728 provides two levels of configuration access. The admin account has read/write
access of all configuration parameters, and the user account has read access only. The user
account can only view the configuration, but will not be able to make modifications.
ATTENTION
By default, no password is assigned to the PT-7728's web, Telnet, and serial consoles. If a
password is assigned, you will be required to enter the password when you open the serial
console, Telnet console, or Web console.
Account
Setting
Admin
User
Password
Setting
Old password
(max. 16 characters)
New password
(Max. 16 characters)
Retype password
(Max. 16 characters)
Description
This account can modify the PT-7728's
configuration.
This account can only view the PT-7728's
configurations.
Description
Enter the current password
Enter the desired new password. Leave it blank if
you want to remove the password.
Enter the desired new password again. Leave it
blank if you want to remove the password.
3-3
Featured Functions
Factory Default
admin
Factory Default
None
None
None