Network Connection - Fujitsu FUTRO DC20-1 Operating Manual

vSpace software installation

Network connection

The FUTRO DC20-1 can be configured to use DHCP-assigned network settings or it can be
operated with user-specified settings. If you wish to use DHCP network settings, switch the
device on, go to Device Setup, click on the Network tab and select DHCP.
If static addressing will be used in the network, select Static (for static configuration) and enter
the appropriate data under IP, Subnet Mask, Gateway and DNS server (primary and alternate).
Click on OK to save the changes and to return to the Server Selection window.
Fujitsu Technology Solutions 27