Basic Connection And Preparation Of The System - Fujitsu Plasmavision P42XTA51US User Manual

BASIC CONNECTION AND PREPARATION OF THE SYSTEM

• Before this plasma display can be operated for the first time, the connections and settings below must be completed.
VHF/UHF antenna
75 Ohm coaxial cable
* For best reception (of terrestrial signal), an outdoor antenna (OTA) is recommended.
CONNECTIONS TO THE PLASMA DISPLAY
1. Connect the antenna line (VHF/UHF). (If you are not connecting an antenna line, skip to step 2.)
2. Connect the CATV cable.
See the above figure for the connection of the CATV line.
3. Connect the speakers. (For details, see the separate manual "Speaker Unit Installation manual.")
4. Connect external equipment such as a DVD Player. (For details, see "EXAMPLE OF CONNECTING EXTERNAL
EQUIPMENT" P. E-16.)
To the receptacle for 3-prong power plug with grounding
To Speaker To Speaker
E-11