Device Setup - The "Update" Tab - Fujitsu FUTRO DC20-1 Operating Manual

Using the FUTRO DC20-1

Device setup - The "Update" tab

The Update tab allows the user to select from multiple ways to update the device
firmware from a vSpace host on the network.
The first option downloads and installs the latest firmware each time the device connects to the host.
The next option allows the user to manually initiate an immediate update directly from the GUI.
The last set of options defines the update method: from the local subnet, by searching a
pre-defined FTP directory or by updating from a specific file on an FTP server.
The needed credentials for the FTP methods are then entered below. When specifying a particular
firmware file, the whole path to the file on the FTP server (including the filename) must be specified.
The firmware update process can also be initiated from the NC Console.
38 Fujitsu Technology Solutions