Fujitsu FUTRO DC20-1 Operating Manual page 27

► In the Confirm Installation window, click on the Install button to start the installation.
This may take up to 5 minutes; a frequent beeping noise is normal during the process.
The user may get the impression that the system has crashed or is frozen; if however
the cursor switches regularly between the pointer and the hourglass, then this usually
means that the process is running normally. If the installation takes longer than 15
minutes, please contact Technical Support at NComputing.
vSpace Version 6 is running on a 64-bit Client/Server Operating System like
Microsoft Multipoint Server or Microsoft Server 2008R2.
Applications are compatible, unless the application does not explicitly check
for and prevents running on a server operating system.
► Follow the instructions in the following sections to connect your FUTRO DC20-1.

Registration and activation of vSpace and your FUTRO DC20-1 device will
not be required for version 6.1.3 or higher.
► In the vSpace successfully installed window, click on Close to finish the installation
and then select whether you would like to restart the computer immediately or later
(a restart is necessary before vSpace can be used).
Fujitsu Technology Solutions
vSpace software installation
23