Fujitsu FUTRO DC20-1 Operating Manual page 47

In the toolbar, there are three buttons: Send Message, View Station and Stop Station.
The View Station button may not be present if this function is disabled. The View Station
button is not present when you select the session that you are currently using.
To send a message to a session, select the session and click on the Send Message button in the toolbar.
The Broadcast tab allows you to select an access device to send the message to, a From
entry, and a message. The access device must be connected to the same host PC. The
Network Broadcast tab allows you to send a message to an access device that is connected
to the same host PC or a different host PC on the same network.
To view a session's screen, select the session and click on the View Station button. When
viewing a session's screen, you may select whether or not to control the mouse and keyboard
remotely and whether or not to allow the user to control the mouse and keyboard. To
see and change these settings, right-click on the title bar of the session view to bring up
a menu. There are two settings, Controlled by TS Admin and User Input Allowed. To stop
a session, select the session and click on the Stop Station button
Fujitsu Technology Solutions
Using the vSpace Management Console
43