Setup; Unpacking The Cutter; Removing The Packaging From The Cutter; S Class™ Cutter Fully Boxed - Summa S CLASS User Manual

1.1 Unpacking the Cutter

NOTE: Save the shipping box and any other packaging items in case the cutter needs
to be shipped. Do not ship the cutter without first completely repacking it in its original
packaging.
Before unpacking the cutter, make sure that there is enough space to assemble the
stand and to set the cutter aside to insert the stand screws.
CAUTION: For safety reasons, no fewer than two people should be involved in
unpacking the cutter.

1.1.1 Removing the packaging from the cutter

1. Remove the straps and the staples and open the lid of the box.
2. The cutter is packed in foil and sits in front of the box. Behind the cutter is the box
containing the stand. The accessories are located at the bottom in a separate box.
Check first whether everything is present.
3. Do not throw away the packaging. Shipping it without the original box voids any
warranty.

Setup

FIG 1-1
1-1 S CLASS™ CUTTER FULLY BOXED
1 Setup
1-1