Alarm Set - TECHVIEW QV-3039 User Manual

2、Sub stream (shown as Picture 6 (shown as Picture 6-21): Relative parameters should be consistent with DVR local setting.
3、 Email setting: Click [Email setting] option to allow you set alarm email configuration parameters shown
as Picture 6-22. Detailed parameters should be consistent with DVR local setting 22. Detailed parameters should be consistent with DVR local setting. 22. Detailed parameters should be consistent with DVR local setting
4、DDNS Setting
Picture 6-23

6.3.3.4 Alarm Set

Click <Alarm> option to unfold its sub-options: Motion, I/O Alarm shown as Pict Click <Alarm> option to unfold its sub
21): Relative parameters should be consistent with DVR local setting.
Picture 6-21
Click [Email setting] option to allow you set alarm email configuration parameters shown Click [Email setting] option to allow you set alarm email configuration parameters shown
options: Motion, I/O Alarm shown as Picture 6-24.
Picture 6-22
After user applies for DDNS service shown as Picture After user applies for DDNS service shown as Picture
6-24, you could enable <DDNS> function under any 24, you could enable <DDNS> function under any
one network type mode (Static, DHCP and PPPoE). one network type mode (Static, DHCP and PPPoE).
Now you remotely visit the DVR through domain Now you remotely visit the DVR through domain
name (http://domain name: port No
should be consistent with DVR local setting. should be consistent with DVR local setting.
35
User Manual
name: port No). Details setting