TECHVIEW QV-3039 User Manual page 10

Mouse Operation
Except using buttons of front panel or remote controller, you also can use mouse to perform system
operation.
TYPE
Click left key
of Mouse
Click
right key of
Mouse
Double-click
Left key of
Mouse
Moving
Mouse
Sliding Mouse
In menu lock mode, Enter into pop-up menu and clicking any sub
menu to pop up Log-in window; on menu unlock mode, enter into pop-up
menu, and then clicking left key to enter into any sub menu directly.
After entering into main menu, clicking left key could enter into any sub
menu; On [Detailed file] menu mode, clicking left key could playback one
recording file.
Change the status of check box and motion detection area.
Clicking combo box to access pull-down menu; Click left key to stop dwell
time display when dwell time display is activated.
By clicking left key you can adjust Color control bar and volume control bar.
Clicking combo box to access pull-down menu
By clicking left key you can select values in edit boxes or pull-down menu
and supports Chinese word input, special symbol, numeric and character
input, use instead of [Enter-
In live display mode, clicking right key will display pop-up menu
(shown as Picture 5-1).
In Main menu or sub menu mode, clicking right key will exit current menu.
In live display or playback mode, double-clicking left key will maximize
the screen.
Select menu item
On motion mode, sliding mouse will select motion area; On [Color set]
menu mode, sliding mouse will adjust color control bar and volume control
bar.
Function
] or [Backspace
5
User Manual
]