Information; Advanced; Maintain; Event - TECHVIEW QV-3039 User Manual

5.2.7.3 Information

Click [Main Menu System Info] and then enter into the interface shown as Picture 5
Picture 5-55

5.2.8 Advanced

5.2.8.1 Maintain

Click [Main menu Advanced
Picture 5-56
Load Default: If [Load Default] is selected, you can initialize the system to the ex If [Load Default] is selected, you can initialize the system to the ex If [Load Default] is selected, you can initialize the system to the ex-factory default.
Reboot: Click [Reboot] button to manually restart DVR system. Click [Reboot] button to manually restart DVR system.
Shutdown: Click the [Shutdown] button to shutdown the device. Click the [Shutdown] button to shutdown the device.
Load Setting: Load the parameters in the U flash disk to device; after loading successfully, system will Load the parameters in the U flash disk to device; after loading successfully, system will Load the parameters in the U flash disk to device; after loading successfully, system will
auto restart.
Save Setting: Save the parameters of device to a flash disk. Save the parameters of device to a flash disk.
Note:
1. Do not take out the USB memory or break the power during the update;
2. When the update is done, system will be automatically restarted; When the update is done, system will be automatically restarted;
3. Please manually recovery ex Please manually recovery ex-factory default after system rebooting;
4. It will be available only when DVR return back to Preview mode and no It will be available only when DVR return back to Preview mode and no any operation.

5.2.8.2 Event

Click [Main menu Advanced
Picture 5-58
Info] and then enter into the interface shown as Picture 5-55. Info] and then enter into the interface shown as Picture 5
Advanced Maintain] to enter into the maintain interface shown as Picture 5 Maintain] to enter into the maintain interface shown as Picture 5-56.
the USB memory or break the power during the update;
Advanced Event] to enter into the <Event> interface shown as Picture 5 Event] to enter into the <Event> interface shown as Picture 5-58.
Now user can check the current Device check the current Device name,
Device ID, Device type, Device S/N, MAC Device ID, Device type, Device S/N, MAC
address, IE version, Software version, Panel address, IE version, Software version, Panel
version etc.
Auto Reboot: You can enable the auto maintain ou can enable the auto maintain
function regularly as per user's need. function regularly as per user's need.
System Upgrade:
After decompressing update file package, copy After decompressing update file package, copy
the file named "dvrupgrade" to root directory of the file named "dvrupgrade" to root directory of
U flash disk;
Insert the U flash disk into USB port of Insert the U flash disk into USB port of DVR;
Click <Upgrade>.
Event Type: support the three abnormal types: support the three abnormal types:
Disk No Space, Disk Error and Video Loss. Disk No Space, Disk Error and Video Loss.
Enable: allow you activate abnormal alarm.
Alarm out: select [Enable] or [Disable] select [Enable] or [Disable]
Latch time: you can set how long the buzzer will you can set how long the buzzer will
sound when external sensor alarm is detected sound when external sensor alarm is detected
(10s, 20, 40s, 60s);
Show Message: You can set show message on the You can set show message on the
screen when sensor alarm is detected. screen when sensor alarm is detected.
25
User Manual
any operation.
activate abnormal alarm.