TECHVIEW QV-3039 User Manual page 15

Go to [Main menu Display Output]
to enter into the output set interface enter into the output set interface
shown as Picture 5-5.
Picture 5-5
Click [Spot output] option and set relative Click [Spot output] option and set relative
parameters shown as Picture 5-7.
Picture 5-7
Picture 5-9
Display Mode: Live output: display window will include Single, Quad, 9 Live output: display window will include Single, Quad, 9-split and 16
Spot output: display window will include Single, Quad and 9-split mode. Spot output: display window will include Single, Quad and 9
Transparency: allow you adjust menu's transparency, and its allow you adjust menu's transparency, and its range is 1~128.
Margin: allow you adjust the whole screen's margin. Details operations please refer to the Picture 5 allow you adjust the whole screen's margin. Details operations please refer to the Picture 5-10. allow you adjust the whole screen's margin. Details operations please refer to the Picture 5
Volume: allow you adjust the DVR volume shown as Picture 5 allow you adjust the DVR volume shown as Picture 5-11.
Picture 5-10
Output]
7.
Video output: Support CVBS output Live and Spot
mode simultaneously, and Live is main output, and mode simultaneously, and Live is main output, and
Spot is auxiliary output.
CH Sequence: the option is defaulted to "Off" and
sequence time is 5 second. User can activate the
option as per request.
Rotate time: allow you set sequence time, and
minimum time can be set to 3 seconds. minimum time can be set to 3 seconds.
VGA/HDMI Resolution: allow you select VGA or
HDMI HDMI
1280x1024, 1440x900 and
10
Click [Live] to pop up the interface Click [Live] to pop up the interface
shown as Picture 5-6. Now you could
perform channel sequence setting. perform channel sequence setting.
Picture 5-6
Click [Spot sequence] to enter into the Click [Spot sequence] to enter into the
interface shown as Picture 5 Picture 5-8.
Picture 5-8
Support CVBS output Live and Spot
the option is defaulted to "Off" and
second. User can activate the
allow you set sequence time, and
output, output, including including
40x900 and 1920 x 1080.
split and 16-split mode;
range is 1~128.
Picture 5-11
User Manual
6. Now you could
allow you select VGA or
800x600, 800x600, 1024x768, 1024x768,